RD Mechanical Mechanical Services

The SWINGO 150 was designed for cleaning operations in inner-city areas. With its 1.5 m³ capacity aluminium hopper, a powerful Euro 4 diesel engine, new mechanical suspension, unique water re-circulation system and three different sweeping settings, it is ready to go.

Dust free and economical with water

The SWINGO 150 is equipped with two generously dimensioned fresh water tanks which are mounted on either side between the axles and together have a capacity of 380 litres. In addition two water re-circulation tanks with a total capacity of 240 litres, are integrated into the hopper. The re-circulated water is fed via a filter to the suction nozzle and mixes with the debris. For large amounts of debris, additional fresh water can also be supplied. When the hopper is emptied of debris, the patented water re-circulation tanks retain most of the water, which is then available for further use. This results in a cleaning process which is largely dust free and, at the same time, water consumption is reduced to a minimum.

High degree of operational availability

The water-cooled Euro 4 diesel engine, equipped with a particle filter, quickly gets the SWINGO 150 to the sweeping area at a speed of up to 50 km/h. It reaches its 62 kW output at 2,300 rpm, which makes for low noise levels and a saving in fuel. The three different settings for sweeping operations “Normal” “Maximum” and “Quiet”, which are clearly distinguished by easily identifiable symbols on the control switch, are adapted exactly to the demands of inner-city operations. In the “Normal” position, the SWINGO 150 performs its routine daily tasks with normal amounts of dirt and debris. When there is considerably more dirt and debris, the “Maximum” position provides additional performance. If cleaning is necessary at night or when noise is particularly unwelcome, there is the “Quiet” position for low-noise sweeping.

Centre stage for the operator

The driver’s cab on the SWINGO 150, with its rubber mountings, is straightforward and uses the tried and tested, SCHMIDT design, which enables the operator to engage all the relevant sweeping settings by means of a joystick which is right next to his seat. The fully glazed cab provides excellent all-round visibility, giving the operator a panoramic view of his entire working area and the brushes. The SWINGO 150 has advantages in terms of safety for cleaning operations in inner-city areas.

Sweeping speed	0 – 12 km/h
Transit speed	25/40/50 km/h
Hopper capacity	1.5 m³
Fresh water tank	380 l
Re-circulation water tank	240 l
Sweeping width	1 400 mm – 2 200 mm
Unladen weight	2 680 kg
weight	4 250 kg
Engine	VM R754 Euro 4 diesel
Maximum performance	62kW at 2 300 rpm