RD Mechanical Mechanical Services

Tradewaste

When we measure a lid we always quote the hinged side (W) first followed by length.
Length (L) is hinge hole centre line to front edge.

Shrinkage

• All lids are measured at 15 degrees centigrade
• Nominal size (+ or -) 6mm per 1000mm length
• Temperature: (+ or -) 2mm per 10 degrees centigrade per 1000mm length

Side Hinged Lids / Doors

Dimensions of lids on the detail pages of the website are always shown as “Hinge Hole Centre to Front” (Length or L) and Overall Width of Lid” (W). In the case of Side Hinged Lids and Doors, this may appear pictorially wrong but allows for consistency in measuring.

Colour Palette

The colours below are a guide only and not an exact representation of the actual colour.
* These RAL references are a closest match to the actual colour
If you have a requirement for lids in any colour other than listed below, please contact us.

Name Code RAL Boat Blue CB3 5015* Forecourt Blue CB4 5002 Mint Green CG6 6029 Leaf Green CG7 6002 Moss Green CG8 6004* Standard Orange CO3 2010* Signal Red CR6 3020*

Name Code RAL Toffee Brown CT8 8001* Van Dyke Brown CT9 8014* Bluebell White CW0 9016* Light Grey CW1 7045* Cool Grey CW2 7015* Anthracite CW8 7016* Golden Yellow CY4 1023*

Special Colours

BN Blue CB5 No match Capri Blue CB6 5019 Pantone Blue CB7 No match BV Blue CB9 5008* Classic Navy CB8 5011* Yellow / Green CG1 6018 S&M Green CG2 No match

VJ Green CG4 6003* VF Green CG9 6009* Pure Orange CO4 2004 traffic Purple CP6 4006 Wine Red CR9 3005 Blue Grey CW7 7031 Zinc Yellow CY2 1018

To fit European 770 ltr Tradewaste containers.

General Dimensions	mm
(W) Overall Width of Lid	1225
(D) Hinge Hole Centre to Front	769
(H) Overall Height of Lid	139
Height of Hinge Rod Hole to Base	64
Hinge Hole Diameter	22

To fit European 1100 ltr Trade waste containers.

General Dimensions	mm
(W) Overall Width of Lid	1231
(D) Hinge Hole Centre to Front	986
(H) Overall Height of Lid	143
Height of Hinge Rod Hole to Base	60
Hinge Hole Diameter	23

Recycling lid with open aperture for paper to fit European 1100 ltr containers.

General Dimensions	mm
(W) Overall Width of Lid	1218
(D) Hinge Hole Centre to Front	974
(H) Overall Height of Lid	301
Height of Hinge Rod Hole to Base	59
Hinge Hole Diameter	23
Recyling Aperture Size	649 x 200

Notes about this product

Will also fit some plastic bins:
Otto Mk1 & Mk2, Contenur

Recycling lid fitted with brushes for bottles/cans to fit European 1100 ltr containers.

General Dimensions	mm
(W) Overall Width of Lid	1218
(D) Hinge Hole Centre to Front	974
(H) Overall Height of Lid	301
Height of Hinge Rod Hole to Base	59
Hinge Hole Diameter	23
Recyling Aperture Size	240 x 200 (x2)

Notes about this product

Will fit some plastic bins:
Otto Mk1 & Mk2, Contenur

To fit European 1100 ltr Tradewaste containers.

General Dimensions	mm
(W) Overall Width of Lid	1195
(D) Hinge Hole Centre to Front	1025
(H) Overall Height of Lid	145
Height of Hinge Rod Hole to Base	47
Hinge Hole Diameter	23

Notes about this product

Will fit Otto 1100 Ltr plastic container.

To fit Egbert Taylor 1280 ltr container

General Dimensions	mm
(W) Overall Width of Lid	1260
(D) Hinge Hole Centre to Front	928

Notes about this product

Also avilable in recycling versions

Recycling lid fitted with rubber flap for paper collection to fit Egbert Taylor 1280 ltr container.

General Dimensions	mm
(W) Overall Width of Lid	1266
(D) Hinge Hole Centre to Front	931
(H) Overall Height of Lid	210
Height of Hinge Rod Hole to Base	20
Hinge Hole Diameter	14
Recyling Aperture Size	650 x 130

Notes about this product

Also available with brushes for bottles/cans

Recycling lid fitted with bushes for bottles/cans to fit Egbert Taylor 1280 ltr container.

General Dimensions	mm
(W) Overall Width of Lid	1266
(D) Hinge Hole Centre to Front	931
(H) Overall Height of Lid	210
Height of Hinge Rod Hole to Base	20
Hinge Hole Diameter	14
Recyling Aperture Size	247 x 130 (x 2)

Notes about this product

Also available with a flap for paper collection.

To fit European 1700 Ltr Containers

General Dimensions	mm
(W) Overall Width of Lid	1596
(D) Hinge Hole Centre to Front	1078
(H) Overall Height of Lid	150
Height of Hinge Rod Hole to Base	60
Hinge Hole Diameter	23

Recycling lid with rain hood for paper collection to fit 1700 ltr. European Containers.

General Dimensions	mm
(W) Overall Width of Lid	1634
(D) Hinge Hole Centre to Front	1141
(H) Overall Height of Lid	370
Height of Hinge Rod Hole to Base	60
Hinge Hole Diameter	23
Recyling Aperture Size	538 x 275

Notes about this product

Also available with flap and rubber rossettes.

Recycling lid with plastic flap for paper collection to fit 1700 ltr European containers.

General Dimensions	mm
(W) Overall Width of Lid	1634
(D) Hinge Hole Centre to Front	1141
(H) Overall Height of Lid	180
Height of Hinge Rod Hole to Base	60
Hinge Hole Diameter	23
Recyling Aperture Size	650 x 278

Notes about this product

Also available with rainhood and rubber rosettes.

Recycling lid with rubber rosettes for bottles/cans to fit 1700 ltr European containers.

General Dimensions	mm
(W) Overall Width of Lid	1634
(D) Hinge Hole Centre to Front	1141
(H) Overall Height of Lid	180
Height of Hinge Rod Hole to Base	60
Hinge Hole Diameter	23
Recyling Aperture Size	2 x 280 diam

Notes about this product

Also avialable with rainhood and flap for paper collection.

To fit Egbert Taylor Chamberlain High Rise Bin.

General Dimensions	mm
(W) Overall Width of Lid	991
(D) Hinge Hole Centre to Front	910
Height of Hinge Rod Hole to Base	32

Notes about this product

Fits the following Taylor high rise bins: 940/920/820 ltr

To fit Wheelie Bin Direct 940 ltr high rise container.

General Dimensions	mm
(W) Overall Width of Lid	986
(D) Hinge Hole Centre to Front	941
(H) Overall Height of Lid	83
Height of Hinge Rod Hole to Base	36
Hinge Hole Diameter	19

Notes about this product

Will fit: 940 & 720 ltr

To fit Egbert Taylor 660 ltr Mk1 container

General Dimensions mm (W) Overall Width of Lid 1190 (D) Hinge Hole Centre to Front 644 (H) Overall Height of Lid 130 Height of Hinge Rod Hole to Base 58 Hinge Hole Diameter 16

To fit Egbert Taylor Mk1 1100 ltr container

General Dimensions	mm
(W) Overall Width of Lid	1184
(D) Hinge Hole Centre to Front	930
Hinge Hole Diameter	18

To fit Egbert Taylor Mk1 770 Ltr container.

General Dimensions	mm
(W) Overall Width of Lid	1223
(D) Hinge Hole Centre to Front	765
(H) Overall Height of Lid	128
Height of Hinge Rod Hole to Base	30
Hinge Hole Diameter	18

To fit European 1100 Ltr Containers.

General Dimensions	mm
(W) Overall Width of Lid	1235
(D) Hinge Hole Centre to Front	971
Hinge Hole Diameter	18

To fit 660 Ltr Tradewaste container.

General Dimensions	mm
(W) Overall Width of Lid	1233
(D) Hinge Hole Centre to Front	673
(H) Overall Height of Lid	109
Height of Hinge Rod Hole to Base	30
Hinge Hole Diameter	20

Notes about this product

Flat style lid will fit: Taylor Continental 660 & 500 ltr. and WBD 660 ltr

To fit 770 Ltr Tradewaste container.

General Dimensions	mm
(W) Overall Width of Lid	1237
(D) Hinge Hole Centre to Front	737
(H) Overall Height of Lid	106
Height of Hinge Rod Hole to Base	30
Hinge Hole Diameter	20

Notes about this product

Flat style lid will fit:
Taylor 770 & 820 Ltr container
Sellers 770 & 660 Ltr
Spider 770 & 660 Ltr
T&D 770 Ltr.

To fit 770 ltr Tradewaste container.

General Dimensions	mm
(W) Overall Width of Lid	1241
(D) Hinge Hole Centre to Front	738
(H) Overall Height of Lid	82
Height of Hinge Rod Hole to Base	35
Hinge Hole Diameter	18

Notes about this product

Domed style lid will fit:
Taylor Continetnal 770/880 Ltr
Sellers 770/660 Ltr, T&D 770 Ltr
Spider UK 770/660 Ltr.

Recycling lid with open aperture to fit 770 ltr container.

General Dimensions	mm
(W) Overall Width of Lid	1246
(D) Hinge Hole Centre to Front	735
(H) Overall Height of Lid	216
Height of Hinge Rod Hole to Base	36
Hinge Hole Diameter	19
Recyling Aperture Size	650 x 132

Notes about this product

Will fit: Taylor 770 ltr, Sellers 770/660 ltr
T&D 770ltr, Spider UK 770/660 ltr

Recycling lid with rubberflap for paper colection to fit 770 ltr container.

General Dimensions	mm
(W) Overall Width of Lid	1246
(D) Hinge Hole Centre to Front	735
(H) Overall Height of Lid	216
Height of Hinge Rod Hole to Base	36
Hinge Hole Diameter	19
Recyling Aperture Size	650 x 131

Notes about this product

Will fit:
Taylor Continental 770 & 820 ltr
Sellers 770/660 ltr, T&D 770 ltr
Spider UK 770/660 ltr

Recycling lid with brushes for bottles/cans to fit 770 ltr container.

General Dimensions	mm
(W) Overall Width of Lid	1246
(D) Hinge Hole Centre to Front	735
(H) Overall Height of Lid	216
Height of Hinge Rod Hole to Base	36
Hinge Hole Diameter	19
Recyling Aperture Size	247 x 131 (x 2)

Notes about this product

Will fit:
Taylor Continental 770 & 820 ltr
Sellers 770/660 ltr, Spider UK 770/660 ltr
T&D 770 ltr.

Recycling lid with plastic flap for collection of paper to fit 1100 ltr container.

General Dimensions	mm
(W) Overall Width of Lid	1238
(D) Hinge Hole Centre to Front	934
Hinge Hole Diameter	18
Recyling Aperture Size	750 x 150

Notes about this product

Fits all 1100 ltr tradewaste containers with the exception of Taylor Mk1

To fit 1100 ltr Tradewaste container.

General Dimensions	mm
(W) Overall Width of Lid	1247
(D) Hinge Hole Centre to Front	929
(H) Overall Height of Lid	86
Height of Hinge Rod Hole to Base	30
Hinge Hole Diameter	18

Notes about this product

Flat style lid will fit:
Taylor Continental Mk2, Sellers Eurobin,
Spider UK, Otto (metal container),
T&D Panther & Saracen Mk2.
WBD
Also available in recycling versions for collection of paper & bottles/cans.
See product code:MC4937

Recycling lid with brushes for collection of bottles/cans to fit 1100 ltr container.

General Dimensions	mm
(W) Overall Width of Lid	1245
(D) Hinge Hole Centre to Front	936
Hinge Hole Diameter	18
Recyling Aperture Size	220 x 150 (x2)

Notes about this product

Fits:
Taylor continental Mk2, Sellers Eurobin,
Spider UK, Otto (metal conatiner)
T&D Panther bin & Saracen Mk2, WBD

Recycling lid fitted with hood for collection of paper to fit 1100 ltr container.

General Dimensions	mm
(W) Overall Width of Lid	1245
(D) Hinge Hole Centre to Front	936
Hinge Hole Diameter	18
Recyling Aperture Size	750 x 150

Notes about this product

Fits:
Taylor Continental Mk2, Sellers Eurobin
Spider UK, Otto (metal container)
T&D Panther & Saracen Mk2, WBD

To fit 1100 Ltr Tradewaste container.

General Dimensions	mm
(W) Overall Width of Lid	1240
(D) Hinge Hole Centre to Front	937
(H) Overall Height of Lid	117
Height of Hinge Rod Hole to Base	35
Hinge Hole Diameter	19

Notes about this product

Domed style lid will fit:
Taylor Continental Mk2, Sellers Eurobin,
Spider UK, Otto (metal container),
T&D Panther & Saracen Mk2,
Pelican Mk2.

Recycling lid fitted with brushes for bottles/cans to fit 1100 ltr container.

General Dimensions	mm
(W) Overall Width of Lid	1242
(D) Hinge Hole Centre to Front	940
(H) Overall Height of Lid	209
Height of Hinge Rod Hole to Base	57
Hinge Hole Diameter	19
Recyling Aperture Size	247 x 131 ( x 2)

Notes about this product

Will fit: Taylor Continental Mk2,
Sellers Eurobin, Spider UK,
Otto (metal container),
T&D Panther & Saracen Mk2,
Pelican Mk2.

Recycling lid fitted with rubber flap for collection of paper to fit 1100 ltr container.

General Dimensions	mm
(W) Overall Width of Lid	1242
(D) Hinge Hole Centre to Front	940
(H) Overall Height of Lid	209
Height of Hinge Rod Hole to Base	57
Hinge Hole Diameter	19
Recyling Aperture Size	650 x 131

Notes about this product

Fits:
Taylor Continental Mk2,
Sellers Eurobin,
Spider UK,
Otto (metal container),
T&D Panther & Saracen Mk2,
Pelican Mk2.

To fit 1100 ltr Tradewaste containers.

General Dimensions	mm
(W) Overall Width of Lid	1237
(D) Hinge Hole Centre to Front	977
(H) Overall Height of Lid	150
Height of Hinge Rod Hole to Base	54
Hinge Hole Diameter	18

Notes about this product

Fits Tanks & Drums Saracen Mk1 and is suitable for the roll-top conversion